 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NC7SZ157 TinyLogic UHS 2-Input Non-Inverting Multiplexer April 2000 Revised June 2003 NC7SZ157 TinyLogic UHS 2-Input Non-Inverting Multiplexer General Description The NC7SZ157 is a single, high performance, 2 to 1 CMOS non-inverting multiplexer from Fairchild's Ultra High Speed Series of TinyLogic. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC operating range. The inputs and outputs are high impedance when VCC is 0V. Inputs tolerate voltages up to 5.5V independent of VCC operating range. Features s Space saving SC70-6 lead surface mount package s Ultra Small MicroPak leadless package s Ultra High Speed s Broad VCC operating range: 1.65V to 5.5V s Power down high impedance input/output s Overvoltage tolerant inputs facilitate 5V to 3V translation s Patented noise/EMI reduction circuitry implemented Ordering Code: Order Number NC7SZ157P6X NC7SZ157L6X Package Number MAA06A MAC06A Package Top Mark ZF7 B9 Package Description 6-Lead SC70, EIAJ SC88, 1.25mm Wide 6-Lead MicroPak, 1.0mm Wide Supplied As 3k Units on Tape and Reel 5k Units on Tape and Reel Logic Symbol IEEE/IEC Connection Diagram Function Table Inputs S L L H H H = HIGH Logic Level (Top View) Output I0 L H X X Z = (I0)*(S)+(I1)*(S) L H L H AAA = Product Code Top Mark - see ordering code Note: Orientation of Top Mark determines Pin One location. Read the top product code mark left to right, Pin One is the lower left pin (see diagram). Pin One Orientation Diagram I1 X X L H L = LOW Logic Level Pin Descriptions Pin Name I0, I1 S Z Description Data Inputs Control Input Output Pad Assignments for MicroPak (Top Thru View) TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. MicroPak is a trademark of Fairchild Semiconductor Corporation. (c) 2003 Fairchild Semiconductor Corporation DS500359 www.fairchildsemi.com NC7SZ157 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC) DC Input Voltage (VIN) DC Output Voltage (VOUT) DC Input Diode Current (IIK) @ VIN 0.5V DC Output Diode Current (IOK) @ VIN -0.5V DC Output Source/Sink Current (IOUT) DC VCC or Ground Current (ICC / IGND) Storage Temperature Range (TSTG) Max Junction Temperature under Bias (TJ) Lead Temperature (TL) (Soldering, 10 seconds) Power Dissipation (PD) @+85C SC70-6 180 mW 260C -0.5V to +7.0V -0.5V to +7.0V -0.5V to +7.0V -50 mA -50 mA 50 mA 50 mA -65C to +150C 150C Recommended Operating Conditions Supply Voltage Operating (VCC) Supply Voltage Data Retention (VCC) Input Voltage (VIN) Output Voltage (VOUT) Operating Temperature (TA) Input Rise and Fall Time (tr, tf) VCC @ 1.8V 0.15V, 2.5V 0.2V VCC @ 3.3V 0.3V VCC @ 5.0V 0.5V Thermal Resistance (JA) SC70-6 350C/W Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. 1.65V to 5.5V 1.5V to 5.5V 0V to 5.5V 0V to VCC -40C to +85C 0 ns/V to 20 ns/V 0 ns/V to 10 ns/V 0 ns/V to 5 ns/V DC Electrical Characteristics Symbol VIH VIL VOH Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage VCC (V) 2.3-5.5 1.65-1.95 2.3-5.5 1.65 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 VOL LOW Level Output Voltage 1.65 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 IIN IOFF ICC Input Leakage Current Power Off Leakage Current Quiescent Supply Current 0-5.5 0.0 1.65-5.5 1.55 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.9 1.65 2.3 3.0 4.5 1.52 2.15 2.80 3.68 4.20 0.0 0.0 0.0 0.0 0.08 0.10 0.15 0.22 0.22 0.10 0.10 0.10 0.10 0.24 0.3 0.4 0.55 0.55 0.1 1 Min 0.7VCC 0.25 VCC 0.3 VCC 1.55 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.8 0.10 0.10 0.10 0.10 0.24 0.3 0.4 0.55 0.55 1 10 10 A A A V VIN = VIL or = VIH IOL = 4 mA IOL = 8 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA VIN = 5.5V, GND VIN or VOUT = 5.5V VIN = 5.5V, GND V VIN = VIL or = VIH IOL = 100 A V VIN = VIL or = VIH IOH = -4 mA IOH = -8 mA IOH = -16 mA IOH = -24 mA IOH = -32 mA V VIN = VIL or = VIH IOH = -100 A 1.65-1.95 0.75 VCC TA = +25C Typ Max TA = -40C to +85C Min 0.75 VCC 0.7VCC 0.25 VCC 0.3 VCC Max V V Units Conditions www.fairchildsemi.com 2 NC7SZ157 AC Electrical Characteristics Symbol tPLH tPHL Parameter Propagation Delay S to Z VCC (V) 1.8 0.15 2.5 0.2 3.3 0.3 5.0 0.5 tPLH tPHL Propagation Delay In to Z 1.8 0.15 5.0 0.5 3.3 0.3 5.0 0.5 tPLH tPHL tPLH tPHL CIN CPD Input Capacitance Power Dissipation Capacitance Propagation Delay In to Z Propagation Delay S to Z 3.3 0.3 5.0 0.5 3.3 0.3 5.0 0.5 0 3.3 5.0 Min 2.5 1.2 0.8 0.5 2.5 1.2 0.8 0.5 1.2 0.8 1.2 0.8 TA = +25C Typ 6.0 3.5 2.6 1.9 5.9 3.5 2.6 1.9 3.2 2.4 3.2 2.4 2 14 17 Max 11.5 6.1 4.1 3.2 10 5.8 3.9 3.1 4.8 3.8 4.6 3.7 TA = -40C to +85C Min 2.5 1.2 0.8 0.5 2.5 1.2 0.8 0.5 1.2 0.8 1.2 0.8 Max 12 6.5 4.5 3.5 10.5 6.1 4.2 3.3 5.2 4.1 5.0 4.0 ns ns pF pF (Note 2) Figure 2 CL = 50 pF RL = 500 CL = 50 pF RL = 500 Figures 1, 3 Figures 1, 3 ns CL = 15pF RL = 1 M Figures 1, 3 ns CL = 15 pF RL = 1 M Figures 1, 3 Units Conditions Fig. No. Note 2: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2) CPD is related to ICCD dynamic operatic current by the expression: ICCD = (C PD)(VCC)(fin) + (ICCstatic). AC Loading and Waveforms CL includes load and stray Capacitance Input PRR = 1.0 MHz, tW = 500 ns FIGURE 1. AC Test Circuit FIGURE 3. AC Waveforms Input = AC Waveforms PRR = Variable; Duty Cycle = 50% FIGURE 2. ICCD Test Circuit 3 www.fairchildsemi.com NC7SZ157 Tape and Reel Specification TAPE FORMAT For SC70 Package Designator P6X Carrier Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) Tape Section Leader (Start End) Number Cavities 125 (typ) 3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Package SC70-6 Tape Size 8 mm DIM A 0.093 (2.35) DIM B 0.096 (2.45) DIM F (3.5 0.10) DIM Ko (1.35 0.10) DIM P1 0.157 (4) DIM W 0.315 0.004 (8 0.1) 0.138 0.004 0.053 0.004 www.fairchildsemi.com 4 NC7SZ157 Tape and Reel Specification TAPE FORMAT for MicroPak Package Designator L6X Tape Section Leader (Start End) Carrier Trailer (Hub End) (Continued) Number Cavities 125 (typ) 5000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A 7.0 (177.8) B 0.059 (1.50) C 0.512 (13.00) D 0.795 (20.20) N 2.165 (55.00) W1 0.331 + 0.059/-0.000 (8.40 + 1.50/-0.00) W2 0.567 (14.40) W3 W1 + 0.078/-0.039 (W1 + 2.00/-1.00) 5 www.fairchildsemi.com NC7SZ157 Physical Dimensions inches (millimeters) unless otherwise noted 6-Lead SC70, EIAJ SC88, 1.25mm Wide Package Number MAA06A www.fairchildsemi.com 6 NC7SZ157 TinyLogic UHS 2-Input Non-Inverting Multiplexer Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 7 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com www.fairchildsemi.com |
Price & Availability of NC7SZ157
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |